Automated assembly line is currently the first choice for automation transformation of factory enterprises. However, the creation of an automated assembly line is very complicated and involves many professional technologies and core configurations. Which core configurations are included in an automated assembly line? Automated assembly line Controller-the brain of automation The controller of the automated assembly line is composed of a program counter, instruction register, instruction decoder, timing generator, and operation controller. It is the "decision making mechanism" for issuing operation commands to the device. By changing the wiring of the main circuit or control circuit and Change the resistance value in the circuit to control the starting device of the motor, speed regulation, braking and reverse, so as to complete the coordination and command the operation of the entire production line! Robots-the performers of automation When the controller issues an operation instruction, a robot hand is required to automatically perform the work. It generally consists of an actuator, a driving device, a detection device, a control system, and a complex machine. It can run pre-programmed programs or Act in accordance with the principles of artificial intelligence technology. Instead of manually performing various repetitive and high-precision operations! Servo motors-the power of automation Servo motor refers to the engine that controls the operation of mechanical elements in the servo system. It is an auxiliary motor indirect speed changing device that can control the speed and position accuracy very accurately. In the automatic control system, it is used as an actuator and has electromechanical time. The characteristics of small constant, high linearity, and starting voltage can convert the received electrical signals into angular displacement or angular velocity output on the motor shaft! Sensors-automated tactile Sensors are the primary link to achieve automatic detection and automatic control. In modern industrial production, especially in the automated production process, various sensors are used to monitor and control various parameters in the production process, so that the equipment works in the normal state or the best state. And make the product reach the best quality! Industrial cameras-the automated eye An industrial camera is a key component of a machine vision system. It is generally installed on the machine assembly line instead of the human eye for measurement and judgment. It is converted into an image signal by a digital image capture target and transmitted to a dedicated image processing system. The image system performs various calculations on these signals to extract the features of the target, and then controls the field equipment movement based on the results of the discrimination! Instrumentation-automated regulation The instrumentation of the automated assembly line is a device or equipment used to detect, measure, observe, and calculate various physical quantities, material components, and physical parameters. During the operation and use of the automatic assembly line, various instruments and meters need to be applied, such as measuring the parameter values required for some control processes such as pressure, liquid level, flow rate, and temperature. Related instruments and meters are needed! The automatic assembly line involves the operation of components in many aspects, and the core configuration of each part is responsible for the corresponding function operation. Therefore, the construction of an automated assembly line not only requires a high cost, but also requires very professional technology and rich experience. Strength is demanding. |
Record: ICP.17021542
